OJEU was released Commission Implementing Decision (EU) 2021/455 on March 16, Implementing Decision (EU) 2012/1326 amended (this document supplements EMC Directive 2014/30/EU) to include EN 55035:2017/A11:2020 in the harmonization standard;
The expiry date of EN 55024:2010 is clearly defined as 16 September 2022;
Meanwhile, the expiry date of EN 55103-2:2009 has been extended from 18 November 2021 to 28 July 2022;
So far,The latest OJ harmonized version of the MME product standard is
EN 55032:2015/A11:2020, EN 55035:2017/A11:2020
BTL has been able to implement the new version of the above standard, and it is recommended that manufacturers' products be tested in accordance with the new version.
Related Links:.
https://ec.europa.eu/docsroom/documents/45024
https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX%3A32021D0455
Relevant information
EU Releases Exemption Guidelines on Removability and Replaceability of Portable and LMT Batteries — Multiple Product Categories Relief Granted
On July 14, 2026, the European Commission published the "Commission Guidelines to Facilitate the Harmonised Application of Provisions on the Removability and Replaceability of Portable and Light Means of Transport (LMT) Batteries" (Commission Notice C(2026) 5032 final). These guidelines aim to provide a uniform interpretative framework for the implementation of Article 11 of the EU Battery Regulat
6G Developments: Past, Present and Future
The formulation of 6G standards has entered a more concrete phase. At the 3GPP RAN Plenary Meeting held in Singapore in June 2026, the industry made progress in multiple key research areas and finalized the timeline for Release 21, which is regarded as the first standard version expected to formally define 6G.
Overview of EN IEC 61000-4-29:2026
The key focus of the 2026 edition is to address new DC power distribution environments, especially higher-voltage DC systems. It also clarifies test generator capability, duration tolerance, current limitation during short interruptions, inrush current verification, result evaluation, and test report requirements. For products using 24 Vdc, 48 Vdc, 380 Vdc, 400 Vdc, 800 Vdc, or other DC input pow