BTL is recognized by Qualcomm Smart Transmit test
The recession in 2022 due to the impact of the epidemic on the consumer market will be a difficult year for most manufacturers (mobile phones and terminals) and laboratories, and BTL's professional technical requirements have not been affected by the epidemic and the market. Recession and retreat and cessation.
In May of this year, BTL the installation of Dasy 8 equipment.
The DASY 8 equipped by BTL has new test functions:
1. Power Density test capability of 5G NR FR2 and WiFi 6E,
2. Configure the Wrist Phantom, which meets the requirements of IEEE/IEC 62209-1528. For CE and ISED certification, you can directly use this Phantom to test watch products.
In order to serve more customers, BTL also invests money and research to obtain the authorization of Qualcomm Smart Transmit test software and the approval of Qualcomm test laboratory. When the product supports TAS function, the report part should be divided into:
a. Part 0: SAR & PD characterization,
b. Part 1: SAR evaluation under static power state,
c. Part 2: SAR evaluation under dynamic power conditions.
At present, the main test scenarios of TAS are as follows:
Time-varying Tx power transmission
1. Change in call scenario (reconnect after call disconnection)
2. Change in technology and band
3. Change in antenna
4. Change in DSI (Device Status Index Scene Switch)
5. Change in time window
6. SAR exposure switching (SAR value switching)
The existing common power reduction is as follows:
a. Receiver on/off (handset switch);
b. Hotspot on/off (hot switch);
c. Proximity sensor (distance sensor);
d. MiMo Tx and simultaneous transmission.
However, 5G NR, WiFi 6E and even the upcoming WiFi 7 will make the antenna design of the terminal more and more difficult. The above methods cannot meet the actual application. The introduction of the TAS function is one of the options of various terminal customers, and BTL also has cSAR. , DASY 8 and ETS 8923 OTA test system, which can assist end customers in testing in one-stop. Customers are welcome to come to BTL for research and discussion.
Relevant information
EU Releases Exemption Guidelines on Removability and Replaceability of Portable and LMT Batteries — Multiple Product Categories Relief Granted
On July 14, 2026, the European Commission published the "Commission Guidelines to Facilitate the Harmonised Application of Provisions on the Removability and Replaceability of Portable and Light Means of Transport (LMT) Batteries" (Commission Notice C(2026) 5032 final). These guidelines aim to provide a uniform interpretative framework for the implementation of Article 11 of the EU Battery Regulat
6G Developments: Past, Present and Future
The formulation of 6G standards has entered a more concrete phase. At the 3GPP RAN Plenary Meeting held in Singapore in June 2026, the industry made progress in multiple key research areas and finalized the timeline for Release 21, which is regarded as the first standard version expected to formally define 6G.
Overview of EN IEC 61000-4-29:2026
The key focus of the 2026 edition is to address new DC power distribution environments, especially higher-voltage DC systems. It also clarifies test generator capability, duration tolerance, current limitation during short interruptions, inrush current verification, result evaluation, and test report requirements. For products using 24 Vdc, 48 Vdc, 380 Vdc, 400 Vdc, 800 Vdc, or other DC input pow